Sekumatic_MultiClean_Produktpalette

Sekumatic® MultiClean

Mildly alkaline liquid cleaner for use in cleaning and disinfection devices Residue-free, thorough cleaning with very good material compatibility as well as against color anodized aluminum. Free from surfactants and thus foam-free.

  1. Home
  2. Our Offerings
  3. Sekumatic MultiClean

Contact Us

Give Us a Call

Ecolab Healthcare France
Avenue Aristide Briand
CS 70 107
94112 Arcueil Cedex France

If you would like further information about Ecolab Healthcare products or you would like to contact an Ecolab Representative, please fill out the contact form.

 

 

You can also get in touch with Ecolab Healthcare by dialing +33 149 696 776.

If your query is related to deliveries or invoicing, please contact  Ecolab customer service: client.hrc@ecolab.com

Tell Us About Yourself
Where Are you Located?
How Can We Reach You?
What Can We Help You With?

Product Details

  • Foam-free
  • Formulation with high material protection
  • Excellent cleaning performance
  • Efficient and economic
Our performance Your advantage
Specially developed formulation with high material protection

Very good material compatibility even against sensitive materials e.g. (color-) anodized aluminum

Surfactant-free with high performance formulation components Low foam development and very good cleaning performance against typical stains from the medical area

Addition of corrosion inhibitors

Broad use spectrum over almost all materials used in the medical area
pH > 10 in the application solution at 55 ºC Secure reprocessing of instruments at all water hardness grades

In cleaning and disinfection devices in the medical area, depending on the water quality, can be used with 2-8ml/l preferably with DM water.

For surgical instruments and other medical instruments and accessories that can be thermally disinfected at 93 °C.

For reprocessing OP shoes and thermolabile medical materials at 45 to 60 °C.

Also suitable for reprocessing lab glass and baby bottles.

Chemical thermal disinfection; with Sekumatic FD or Sekumatic FDR at 60 °C for 5-10 minutes. Neutralization: using Sekumatic FNZ or Sekumatic FNP.

Thermal disinfection: For final rinsing, preferably use fully demineralized water (DM).

Composition

Sekumatic MultiClean has phosphates, silicates, potassium hydroxide and corrosion inhibitors as the base.

Use (after commencement) Shelf life
 
In container
 
until the printed expiration date

1
Please note the following to ensure the correct storage of environmental hygiene and instrument disinfectants: The original containers (canisters, buckets or bottles) with the disinfectant concentrate (or powder) should be stored at temperatures below 25°C and kept dry and clean. A brief period below or above the given storage temperature (e.g. during transport) will not diminish the effectiveness.
The containers are to be sealed tightly after each use. Please also take care that the concentrate remaining in the container is not contaminated when preparing the application solution.

Chemical- physical data
Density 20 °C 1.3 g / ml
pH value* (concentrate) 20 °C ca. 13.4
pH-range* (solution, 5-8ml/l in DM-water) 20 °C 11.3 – 11.6
Conductivity (solution, 5-8ml/l in DM-water) 20 °C 2.2 – 3.2 mS / cm

* pH-value measurements under operating conditions always by using pH-meter with temperature compensation

 

pikto_instrumente_maschinellInstrument cleaning of medical devices

 

 

Recommendations

Other interesting products from our range:

Sekumatic_FNZ_20L
Sekumatic® FNZ

Fluid neutralizer, citric acid base

Sekumatic_FNP_20L
Sekumatic® FNP

Fluid neutralizer, phosphoric acid base.

ecolab_fa_installiert
ECOLAB Conveying System

Pumping system for process chemicals in 25 VA ambiance

DOWNLOADS

For more product details, pack sizes and all relevant order codes, please download the product brochure below.

Healthcarereceptionarea550x310
PARTNER WITH US

Ecolab Healthcare can partner with you to help increase efficiency, improve outcomes and reduce the risk of Healthcare Associated Infections (HAIs).